Motorola XU1100 - Manual (Page 26)

Featur
es
14
X
Without Accessories
(XU2600 and XV2600 Only)
•
Enable VOX by pressing M while turning the radio On.
• VOX operation can be temporarily disabled by pressing M, g will flash.
• A short press of M will re-enable VOX.
Note: There is a short delay between when you start talking and the radio
transmits.
Setting Sensitivity Level
•
Press \ as needed to display g. The radio will also display the sensitivity type
you are setting:
?
= Microphone Gain
H = External VOX (with audio accessory)
I = Internal VOX (without accessory)
• Select Sensitivity Level of 0,1, 2, or 3 by using [ or ]:
3 = High Sensitivity
2 = Medium Sensitivity
1 = Low Sensitivity
0 = Off (VOX with accessories only)
Note: There is a short delay between when you start talking and the radio
transmits.
3
H
6881038B80.book Page 14 Wednesday, September 26, 2001 4:16 PM