Philips Magnavox 51MP6100Ds - Manual (Page 24)

24
B
LOCK
/C
LEAR
A
LL
C
HANNELS
A
T
T
HE
S
AME
T
IME
Using the Features Menu
A
fter blocking specific channels there may come
a time when you want to block or clear all the
channels at the same time.
Once you’ve entered your access code and the
AutoLock™ features are displayed on the screen:
1
For digital mode:
Press the CURSOR DOWN w button to select
Block channel. Press the CURSOR RIGHT u
button to enter the Channel blocking menu.
For analog mode:
Press the CURSOR DOWN w button to select
ALL.
2
For digital mode:
If All ch. is locked, press the OK button to
clear all blocked channels. All channels will be
viewable.
If All ch. is unlocked, press the OK button to
lock all channels. When this is done, ALL avail-
able channels will be blocked from viewing.
For analog mode:
If press the CURSOR RIGHT ubutton to
clear all blocked channels. All channels will be
viewable.
3
When finished, press the EXIT/INFO button
to remove the menu from the screen.
NOTE: If you ever forget your code, the 0, 7, 1, 1 code
is the factory default and can be used to enter and create
a new access code. Enter the above number twice.
Use the A/D button on the Remote Control to switch
between Digital and Analog channels.
H
ELPFUL
H
INT