Philips Magnavox 51MP6100Ds User Manual

Page 23

LOCK

HANNELS

ART

Using the Features Menu

fter your personal access code has been set

(see previous page), you are now ready to

select the channels you want to block out or censor.

Once you’ve entered your access code and the

AutoLock™ features are displayed on the screen:

Press the CURSOR UP v or DOWN wbut

tons until the words Block Channel are high

lighted.

For digital mode:

Press the CURSOR RIGHT ubutton to enter

the Channel Blocking menu. Press OK to lock or

unlock the channel.

For analog mode:

Press the CURSOR RIGHT ubutton to block

the channel. A padlock symbol will appear on the

right of the channel number. If you decide not to

block the channel, press the CURSOR RIGHT

ubutton again to remove the block

(The padlock symbol disappears).

Repeat steps 1-2 to block another channel.

When finished, press the EXIT/INFO button

to remove the menu from the screen.

NOTE: If you ever forget your code, the 0, 7, 1, 1 code

is the factory default and can be used to enter and create

a new access code. Enter the above number twice.

Use the A/D button on the Remote Control to switch

between Digital and Analog channels.

ELPFUL

INT