Mercedes-Benz 2003 E-Class - Manual (Page 130)

130
Controls in detail
Control system
̈ Press button è or ÿ repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occured, the mes-
sage in the display is:
No Malfunction
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
̈ Press button k or j.
The stored messages will now be dis-
played in order. See the "Practical
hints" section for malfunction and
warning messages (
୴ page 295).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the key in the
starter switch is turned to position 0 or re-
moved from the starter switch.
Settings menu
In the Settings menu there are two func-
tions:
ț The function To reset: Press reset
button for 3 seconds , with which you
can reset all the settings to the original
factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the Settings menu is seen in the
display.
i
The message memory will be cleared
when you turn the key in the starter
switch to position 1 or 2. You will then
only see high priority malfunctions.
These are highlighted by red back-
ground (
୴ page 295).