Moxa Technologies NPort 5110 Series - Manual (Page 27)

NPort 5110 Series User’s Manual Web Console Configuration
5-5
Network Settings
You must assign a valid IP address to NPort 5110 before it will work in your network environment.
Your network system administrator should provide you with an IP address and related settings for
your network. The IP address must be unique within the network (otherwise, NPort 5110 will not
have a valid connection to the network). First time users can refer to Chapter 3, “Initial IP Address
Configuration,” for more information.
You can choose from four possible “IP configuration” modes—Static, DHCP, DHCP/BOOTP,
and BOOTP—located under the web console screen’s IP configuration drop-down box.
IP configuration
Method Function Definition
Static User defined IP address, Netmask, Gateway.
DHCP DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server
DHCP/BOOTP DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server, or BOOTP Server assigned IP address (if the DHCP Server does not
respond)
BOOTP BOOTP Server assigns IP address