Replacing the print head – MTD TLP 2824-Z User Manual
Page 43
Maintenance
Replacing the Print Head
980533-001 A
TLP 2824-Z User Guide
43
Replacing the Print Head
In the event you need to replace the print head, read the procedure and review the removal and
installation steps before actually replacing the print head.
Caution • Prepare your work area by protecting against static discharge. Your work area
must be static-safe and include a properly grounded conductive cushioned mat to hold the
printer and a conductive wrist strap for yourself.
Caution • Turn the printer power off and unplug the power cord before replacing the print
head.
Tools •
You will need to use a #2 Phillips driver during this procedure.