Printing on fan-fold media – MTD TLP 2824-Z User Manual
Page 34
34
TLP 2824-Z User Guide
980533-001 A
Operations & Options
Printing on Fan-Fold Media
Printing on Fan-Fold Media
Printing on fan-fold media requires you to set both the media hangers and the media guides in
position.
1.
Open the top cover.
2.
Open the hangers to their widest position.
3.
Snap the holder-open lock towards the front of the printer.
4.
With a sample of your media, adjust the guides to the width of the media. The guides
should just touch, but not restrict, the edges of the media.
5.
Insert the media through the slot at the rear of the printer.
6.
Run the media between the hangers and guides.
7.
Close the top cover.