Moxa Technologies CA-132/132I - Manual (Page 6)

CA-132/132I User’s Manual 1-2
Overview
CA-132/132I is a PC/104 module that supports the RS-422/485 serial interfaces, and can be used with
PC/104 CPU modules or CPU cards that accept PC/104 expansion modules. CA-132/132I has two
independent serial interfaces, which are accessed through RJ45 connectors. You can configure both ports
for the RS-422 or RS-485 interfaces by DIP switch. The module’s industry-standard MOXA UART
(16C550 compatible) is fully programmable. Moxa has implemented its patented ADDC™ technology
for RS-485 automatic direction control, so there is no need to change jumpers to switch the module
between driver and receiver. The built-in 16 KV ESD surge protection protects other devices connected
to the RS-485 network.
Package Checklist
MOXA CA-132/132I products are shipped with the following items:
! 1 MOXA CA-132/132I 2-port serial board
! CA-132/132I Document & Software CD
! CA-132/132I Quick Installation Guide
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
CA-132/132I Series products enjoy the following features:
! 2 RS-422/485 ports
! RS-422/485 communication distance up to 4000 feet (1.2 km)
! High speed data transmission rate up to 230.4 Kbps
! Switch selectable for I/O and INT Vector addresses (from Hex 000 to 3FF)
! 64-byte FIFOs
! IRQ settings are selectable by jumper
! Built-in 16 KV ESD surge protection for TX and RX lines
! 4 LED indicators onboard (red for TX, and green for RX)
! Support 4-wire RS-422 and 2/4-wire RS-485
! ADDC™ for RS-485 transmission
! CA-132I has 2 KV isolation protection
Product Specifications
CA-132/132I Series boards have the following specifications:
!
Dimensions: 9.6 cm × 9.0 cm
! Bus: PC/104
! Baud rate: 50 to 230.4 Kbps
! Character length: 5, 6, 7, or 8 bits
! Parity: even, odd, none, mark, and space
! Stop bit: 1, 1.5 or 2
! I/O connectors: dual 8-pin RJ-45 connectors
! Interrupt levels: IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
! Clock input: 14.745 MHz
! Power consumption (+5 V): CA-132/210 mA, CA-132I/455 mA
! MTBF: 100,000 hrs @ 25℃ environment
! Operating temperature: 0 to 55℃