Mazda 2010 CX-9 - Manual (Page 3)

3 4
To Program the Driver’s Seat Position
1 Park the vehicle.
2 Adjust the seat to the desired position using the slide/tilt and
recline switches.
3 While pushing the memory seat SET button in, push one of the three
programming buttons until a beep is heard. Programming is now
complete. Program the remaining two buttons as desired.
nOTE: You can also program a seat position for each advanced key/retractable type
key used with the vehicle. See Owner’s Manual for programming instructions.
To Move the Seat to a Programmed Position
• With driver’s door OPEn and ignition OFF, push and release one
of the programmed buttons (1, 2, or 3) when entering the vehicle.
Or
• With driver’s door CLOSED and ignition On, push and hold one of
the programmed buttons (1, 2, or 3).
nOTE: Memory seat functions DO NOT operate when driver’s door is OPEN and
ignition is ON, when driver’s door is CLOSED and ignition is OFF, or when the vehicle
is in motion.
Seats
ELECTrOnICALLy OPErATED SEAT W/MEMOry
Slide/Tilt Switch
Seat can be moved back
and forth, raised, lowered,
or tilted with this control.
Lumbar Switch
Push forward or backward to increase or
decrease lumbar support.
recline Switch
Push forward or backward
to adjust seatback angle.
Memory Seat Switch
1 Open liftgate.
2 Lower head restraints.
3 Pull the strap on the rear of the
seat while pushing the seat
forward to lay flat.
To return to the Original Position
Pull the strap to return the seatback to the original position.
ThIrD-rOW SEAT ACCESS
• Pull the third-row seat access lever on the
side of the second-row seatback to fold
and slide the seat forward to access
third-row seating.
• Return the second-row seatback to the
normal upright position by pulling up on
the seatback until it locks into place.
• Slide the second-row seat forward or back
for proper legroom using the lever under
the front of the seat.
SECOnD rOW SEATBACK rECLInE
To recline the seatback, lean forward slightly while pulling the third-row
seat access or seatback folding lever. Then lean back to the desired
position and release the lever.
FOLDInG ThE SECOnD-rOW SEATS
1 Unfasten the lap portion of the center-rear seat belt.
2 Slide seat all the way back toward rear of vehicle.
3 Lower head restraints.
4 Pull the seatback folding lever and fold the seatback forward.
SPLIT FOLDInG ThIrD-rOW SEAT
To create a flat luggage compartment
space, fold the seatbacks forward.
Third-row seat
access lever
Seatback folding
lever
Straps
193094_10a_CX-9_SSG_070109.indd 4-5 7/1/09 10:08:07 AM