Milwaukee 5374-1 User Manual
Page 3
page 3
FUNCTIONAL DESCRIPTION
1. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
2. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
3. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a live wire will make exposed metal parts of the tool live and shock the operator.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
SPECIFIC SAFETY RULES
Specifications
Cat.
No.
5370-1
5371-20
5376-1
5374-1
Speed
low
high
speed
control
No Load
RPM
0 - 1 000
0 - 2 500
0 - 2 500
Blows
per
minute
0 - 20 000
0 - 50 000
0 - 50 000
Flat
boring
bit
1-1/2"
3/4"
3/4"
Auger
bit
7/8"
*
N r
Ship
auger bit
7/8"
*
N r
Selfeed
bit
1-1/8"
*
N r
Hole
saw
3-1/4"
*
1-3/4"
Twist
drill
1/2"
3/8"
3/8"
Carbide
tipped
bit
5/8"
9/16"
9/16"
Screw
fasteners
1/4"
3/16"
N r
Wood
Steel
Concrete
* Set gear shift to low speed se tting when boring holes in wood.
Nr = Not recommended
4
3
5
1
6
2
7
8
9
11
12
10
1. Depth rod
2. Side handle
3. Nameplate
4. Trigger
5. Cord
6. Lock button
7. Forward/Reverse switch
8. Gear shift (Cat Nos. 5370-1, 5376-1 & 5371-20 only)
9. Collar hex
10. Handle ring
11. Hammer-drill selector collar
12. Keyed chuck (Keyless chuck on Cat No.5376-1)
Amperes
Symbology
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
No Load Revolutions
per Minute (RPM)
Mexican Approvals Marking