Multi Tech Equipment MULTIACCESS MA30120 - Manual (Page 24)

MultiAccess Quick Start Guide Connecting & Starting the MultiAccess
Multi-Tech Systems, Inc. PN 82001423L 21
Radius Server > User Setup
The User Setup screen establishes who the remote access user is. A user name and password has to be
enterred for each remote user that is dialing in to the MultiAccess. The User name and password of the remote
user is all that is needed initially. If you check or enable Service Type through IP Address windows you will over
ride the Default User Setup.
1. Enter the remote user’s name in the Username window.
2. Enter the password of the remote user in the Password window.
3. The Authentication Type should remain at the default setting.
4. Click the Add button when you are finished.