Multi Tech Equipment MULTIACCESS MA30120 - Manual (Page 19)

Connecting & Starting the MultiAccess MultiAccess Quick Start Guide
16 Multi-Tech Systems, Inc. PN 82001423L
Fax Setup
Fax setup is initiated when you allocate modem(s) to the integrated Hylafax ™ Fax Server. This is achieved by
setting the selected modem’s usage to Fax. The Fax Setup screen is used to configure the integrated Hlyfax
Server for sending and receiving faxes.
The sending of outbound faxes via the Hylafax Server requires the use of a Hylafax compatible Fax Client
software, e.g., Multi-Tech’s FaxFinder Client. The General Fax Setup group is used to add Fax Clients to the
Hylafax server.
The Fax Client must be installed on each workstation that you wish to send faxes from. The Fax Client must use
the credentials defined in the General Fax Setup group to submit faxes for sending. The Fax Client is not used for
receiving faxes.
Inbound faxes received from the T1/E1 digital line are converted to tiff files and then emailed from the Hylafax
server to the specified recepient. The Fax Delivery Setup group is used to configure the routing of inbound faxes.