Motorola WPCI810G - Manual (Page 22)

Configuration Section 3
WPCI810 3-7
Field Description
Network
Authentication Select if your access point requires authentication. Match the
authentication used by the network.
Open No authentication is used.
Shared The Pre-Shared Key (PSK) authentication method is
used.
802.1X IEEE port based network access control authentication
method is used.
WPA Wi-Fi Protected Access (WPA) and Wi-Fi Protected
Access version 2 (WPA2) authentication is used.
WPA-
PSK WPA and WPA2 authentication is used with
Pre-Shared Key, which enables you to enter a static
network key.
CCKM Cisco ® proprietary standard Lightweight Extensible
Authentication Protocol (LEAP).
Note: If you select WPA, 802.1X, or CCKM, you may be required to
enter further information on the Authentication tab. Ask your network
administrator for additional information.
Data Encryption Select the type of security encryption algorithm used. The available
types of encryption are based on the type of the authentication
selected.
Disabled No encryption. Available only with Open and Shared
authentication.
WEP Deselect Network Key is provided for me
automatically and enter the Key provided by the
network. Available only with Open, Shared, 802.1X,
and CCKM Authentication.
TKIP Available with CCKM Authentication.
Auto Available with WPA/WPA2 and WPA-PSK/WPA2-PSK
Authentication type, with TKIP or AES encryption
automatically negotiated with the access point.
CKIP Available with 802.1X and CCKM (Cisco Centralized
Key Management) Authentication.
Network key Enter the security key for data encryption, when WEP or WPA-PSK is
selected. This can be entered in ASCII or hexadecimal for WEP and
in ASCII for WPA-PSK.