MITSUBISHI ELECTRIC MITSUBISHI MAM MAM-AM24 - Manual (Page 17)

3.3 Mounting
Mount the modem by pushing or snap fitting it onto a DIN rail (top-hat rail 35 mm).
E
ATTENTION:
P
DANGER:
Installation and Mounting Mounting
Mitsubishi Alarm Modem 3 - 4
- +
COM1
(RS485)
COM2
(RS422
/ 485)
Mitsubishi
Alar m Modem
GSM
xxxxx
Xxxxx
+ X xxx
xx - xx X XX, xxx.
X.X X
027954
541034
Ser vice
Po we r
Pr ocess
Line
Data out
Modem
Mode
Antenna
DC 10...30V
SIM-Card
Pus h
R+ R- -T +T (0V)
Bus
Config.
Fig. 3-4:
Pull out the black tab on the device using
a screwdriver and so the device can
snap fit to the DIN rail. You can remove
the device from the rail in the same way.
Ensure that the retaining machanism of
the modem snaps cleanly and securely
into the DIN rail.
Service
Antenna
Power Process Line Data out Modem Mode
027954
541034
- + COM2 (RS232) COM1 (RS232)
SIM-Card Push
Fig. 3-5:
Modem mounted on the DIN rail
b The device must only be used in rooms that are dry and clean. Protect the
device from humidity, water splashes or heat.
b Do not subject the device to severe vibration.
b The device must not be used in environments containing flammable gases,
fumes or dust.