Motorola 1725-36197-001 - Manual (Page 9)

Motorola: RFS 6000 Wireless Switch with AP300
PN: 1725-36197-001_A.doc 9
Configuring the Wireless Switch from the
Default Configuration
Radio Settings
Configuring radio settings through the CLI
The parameters for default-11bg will be configured on the switch.
When an AP is adopted on the switch it will inherit all the default-
11bg or 11a parameters. To configure radio settings for the wireless
switch, use the following commands.
When SpectraLink Wireless Telephones are configured for
802.11b & b/g mixed mode:
RFS6000>en
RFS6000#conf t
RFS6000 (config)#wireless
RFS6000 (config-wireless)#country-code us
RFS6000 (config-wireless)#radio add 1 00-A0-F8-CD-ED-EC
11bg ap300
RFS6000 (config-wireless)#radio 1 beacon-interval 100
RFS6000 (config-wireless)#radio 1 dtim-period 3
RFS6000 (config-wireless)#radio 1 bss 1 1
RFS6000 (config-wireless)#radio 1 speed basic1 basic2
basic5p5 6 9 basic11 12 18 24 36 48
When SpectraLink Wireless Telephones are configured for
802.11g only mode:
RFS6000>en
RFS6000#conf t
RFS6000 (config)#wireless
RFS6000 (config-wireless)#country-code us
RFS6000 (config-wireless)#radio add 1 00-A0-F8-CD-ED-EC
11bg ap300
RFS6000 (config-wireless)#radio 1 beacon-interval 100
RFS6000 (config-wireless)#radio 1 dtim-period 3
RFS6000 (config-wireless)#radio 1 bss 1 1
RFS6000 (config-wireless)#radio 1 speed 1 2 5p5 basic6 9
11 basic12 18 basic24 36 48 54