Motorola 1725-36197-001 - Manual (Page 8)

Configuration Guide
PN: 1725-36197-001_A.doc 8
Installing the AP license through the CLI
For the RFS6000 to adopt AP300s, a license has to be installed. Obtain
the license key and then install based on the following steps:
RFS6000>en
RFS6000#conf t
RFS6000(config)#license AP
Installing the AP license through the Web interface
1. Open the RFS6000 applet by entering the IP address of the
wireless switch: http://192.168.2.103
2. In the navigation pane under Switch , click Licenses .
3. Enter the License Key and Feature Name as seen in the figure below.
4. Click the Install button to install the license.