Mark Levinson 433 - Manual (Page 15)

15
Nº433 Power Amplifier
Rear Panel
The numbers in the rear-panel illustration shown below correspond
with the numbered items that appear in the text below.
Caution! Never make or break connections to the Nº433 unless it and all
associated components are powered off and disconnected from
electrical outlets. Before making connections to the Nº433, make
sure the associated preamplifier master volume is set to a
reasonable level.
1. Rear Panel Handles
Allow for safe, convenient lifting and moving of the Nº433. Refer to
“Unpacking” on page 6 for additional information.
Caution! DO NOT attempt to lift the Nº433 from its packing carton alone.
DO NOT attempt to lift the Nº433 while bending at the waist. When
lifting, stand as straight as possible using the leg muscles to lift.
2. Loudspeaker Binding Posts (Outputs)
Provide left, center and right-channel audio output. Two custom-
made, gold-plated, high-current binding posts labeled + (positive)
and – (negative) are available for each channel. Positive binding
posts are red; negative binding posts are black.