MITSUBISHI ELECTRIC M342i - Manual (Page 61)

61-
Settings
Goodbye screen
On switching off your mobile, a Goodbye screen is displayed. This screen is a default one but
it can be customised by selecting any of the Pictures folder images - see "Pictures", page 42.
Backlight
To adjust the backlight for the Standby display:
Keypad
Keypad lock
When the keypad lock is activated, this prevents the accidental operation of the keys. The key
tones are muted.
The keypad lock is suspended when an incoming call is received and resumed once the call is
over. Emergency calls (112) can however be made. If a key is pressed, a reminder message is
displayed.
To activate and deactivate the keypad lock:
or:
Any key answer
This feature allows you to answer a call by pressing any key (except from the Off, No ring and
Side keys) .
Speed dial
Phonebook numbers can be assigned to keys to . The key cannot be assigned a
phonebook number as it is already assigned by default to the Voice Mail number (see "Calling
the voice mail centre to check your messages", page 62).
Numbers stored in both the SIM card and the phone (except fixed dialling numbers) can be
selected.
1 Press OK . Select Settings .
2 Select Display .
3 Select Goodbye screen .
4 Select Default or scroll down to My picture . Select Pictures to select one of the stored
images.
5 Select Save to store your setting.
You can also set the Goodbye screen from My picture menu (see "Setting an image as an Standby display, a
Welcome screen or a Goodbye screen from the pictures folder", page 43).
1 Press OK . Select Settings .
2 Select Display .
3 Select Backlight .
4 Adjust the backlight with the up or down arrow keys and select OK .
5 Select Save to store the setting.
1 Press OK . Select Settings .
2 Select Keypad .
3 Select Keypad lock .
4 To unlock the keypad, press Unlock then .
1 From the Standby display, press and hold to activate the keypad lock.
2 Press and hold to de-activate the keypad lock.
1 Press OK . Select Settings .
2 Select Keypad .
3 Select Any key answer and select On .