Mr. Coffee URTX87D - Manual (Page 7)

Adjusting the power cord length
You can customize the length of the power cord up
to 2 1/2 feet so that it is the exact length you desire.
To increase the length of the power cord:
Grasp the power cord (not the power
plug) and gently pull it away from the
coffeemaker.
To decrease the length of the power cord:
Grasp the power cord a few inches away from
where it attaches to the coffeemaker. Slowly feed
it into the coffeemaker.
Setting the clock
(models URTX83 and URTX87D only)
The clock flashes on the control panel to indicate that it has not been set.
You must set the clock if you want to use the timer feature.
To set the clock:
1.) Press and hold the HOUR button until the clock
displays the correct hour. See fig. A.
The PM indicator will light to indicate a PM time; lf
the PM indicator is not l i t the time is AM.
2.) Press and hold the MIN. button until the clock
displays the correct minute. See fig 6.
The clock is now set.
0
3