Philips Magnavox E9S80UD - Manual (Page 51)

51 EN 51 EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
BI-DIRECTIONAL DUBBING
Note for VCR to DVD duplication
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is
not a malfunction. Be advised to play back the tape until the picture is stabilized, then set the starting point which
you wish to start recording, and start VCR to DVD duplication.
• This unit will automatically stop the duplication if playback with no image is detected for more than 3 minutes
during VCR to DVD duplication.
• Playback sound mode of the dubbed contents is determined by the playback sound mode of the VCR at the point
of dubbing.
• This function is available for audio CD, but not with MP3 files.
4 Use [K / L] to select “VCR DVD”,
then press [OK].
Dubbing Mode
VCR DVD
DVD VCR
Press [SETUP] to exit.
5 Press [VCR], then press [PLAY B] to
find the point where you wish to start
dubbing.
6 Press [PAUSE F] when you come to
the desired start point.
7 Press [DVD], then press [REC MODE]
repeatedly to select the desired
recording mode.
8
Press [D.DUBBING].
VCR to DVD duplication will start.
9 Press [STOP C] to stop the dubbing.
4 Use [K / L] to select “DVD VCR”,
then press [OK].
Dubbing Mode
VCR DVD
DVD VCR
Press [SETUP] to exit.
5 Press [DVD], then press [PLAY B] to
find the point where you wish to start
dubbing.
6 Press [PAUSE F] when you come to
the desired start point.
7 Press [VCR], then press [REC MODE]
repeatedly to select the desired
recording mode.
Rewind or fast forward the tape to the point
where you want to start recording.
8 Press [D.DUBBING].
DVD to VCR duplication will start.
9 Press [STOP C] to stop the dubbing.
VCR to DVD DVD to VCR
E9M81UD_ZV457MG9.indd 51 2008/05/15 14:31:23