Philips Magnavox E9S80UD - Manual (Page 43)

43 EN 43 EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
4
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
JAN/02
REC To Mode
DVD SP
SP 2h00m
Start End
- - : - -
CH
DTV125. 1
12 : 00AM
• You cannot make a program which recording
time exceeds 12 hours.
5
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (L1 / L2), then press
[B].
e.g.) external input mode
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start End
CH
L1
1 : 00AM 12 : 00AM
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] or [the Number buttons] to select
the channel number to record, then press
[B].
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 44
for more details.
e.g.) analog mode
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start End
CH
10
1 : 00AM 12 : 00AM
e.g.) digital mode
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start End
CH
DTV125. 1
1 : 00AM 12 : 00AM
6 Use [K / L] to select the recording
media (“DVD” or “VCR”), then press
[B].
e.g.) recording to DVD
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start
12 : 00AM
End
1 : 00AM
DTV125. 1
CH
7
Use [K / L] to select a recording
mode.
Date
JAN/02
REC To Mode
DVD
SP 1h00m
Start End
CH
DTV125. 1
1 : 00AM 12 : 00AM
SP
Refer to “Recording Mode” on page 38.
• When recording to DVD, you can check the
remaining recordable space of the disc when
you select the recording mode.
Date
JAN/02
REC To Mode
DVD
SP 1h00m
Start End
CH
DTV125. 1
1 : 00AM 12 : 00AM
SP
Auto recording mode select (DVD only)...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
JAN/02
REC To Mode
DVD
Auto 1h00m
Start End
CH
DTV125. 1
1 : 00AM 12 : 00AM
Auto
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
8 Press [OK] when all items are
entered.
After displaying a warning message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer Standby mode.
When Timer set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the Standby mode.
Timer Programming
TUE JAN/01 11:00AM SP (1:00)
JAN/ 2/08 12:00 AM 125.1 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV125. 1
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 44.
9 Press [TIMER SET] to set a timer
programming.
will appear on the front panel display.
TIMER RECORDING
E9M81UD_ZV457MG9.indd 43 2008/05/15 14:31:13