Rerecording (tape duplication) 37, Helpful hints, Make the connections shown above – Philips Magnavox MRD500VR User Manual
Page 37: Press mode/speed to select sp or slp at system 2
Rerecording (Tape Duplication) 37
1
Make the connections shown above.
2
System 1 will play your tape. Put a prerecorded tape into
the cassette compartment of System 1. Press VCR to
put the unit in VCR mode if necessary.
3
System 2 will record your tape. Insert a blank tape in the
cassette compartment of System 2. Press VCR to put
the unit in VCR mode if necessary.
4
Turn on the TV and set it to channel 03 (the RF output
channel of System 2). (To change the System’s output channel, see
step 6 on page eight.)
5
Point the remote control at System 2. Press Number
buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
6
Press MODE/SPEED to select SP or SLP at System 2.
7
Press PLAY B (VCR) on the front of System 1 and
RECORD I on the front of System 2 at the same
time.
To stop recording, press STOP/EJECT CA on System 1, then
press STOP/EJECT CA on System 2.
VIDEO
TV ANTENNA
AUDIO
R
L
PROGRESSIVE
OUT
IN
ANTENNA 75
Ω
ANTENNA 75
Ω
Y
Pb/Cb
Pr/Cr
FM
(75
Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
VCR
IN
DVD/
VCR
OUT
COMPONENT
VIDEO OUT
AM
FL
FR
C
SL
SR
W
SPEAKER (4
Ω)
P I
VIDEO
TV ANTENNA
AUDIO
R
L
PROGRESSIVE
OUT
IN
ANTENNA 75
Ω
ANTENNA 75
Ω
Y
Pb/Cb
Pr/Cr
FM
(75
Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
VCR
IN
DVD/
VCR
OUT
COMPONENT
VIDEO OUT
AM
FL
FR
C
SL
SR
W
SPEAKER (4
Ω)
P I
System 1
(Plays tape)
System 2
(Records tape)
1. Audio cables from
red/white AUDIO
(DVD/VCR OUT) jacks of
System 1 to AUDIO (VCR
IN) jacks of System 2
2. Video cable from yellow
VIDEO (DVD/VCR OUT)
jack of System 1 to yellow
VIDEO (VCR IN) jack of
System 2
3. RF coaxial cable from
the TV ANTENNA OUT
jack of System 2 to the
TV’s ANTENNA IN Jack
These instructions show you how to copy videotapes.The illustration
uses two MRD500 Systems. Other VCRs or Camcorders may
operate differently.
• If you use the AUDIO and VIDEO
(VCR IN) jacks on the back of
System 2, press Number buttons
0, 0, 1 at step 5. L1 will appear on
the TV screen and the System’s
display panel.
• If you use the AUDIO and VIDEO
In jacks on the front of System 2,
press Number buttons 0, 0, 2 at
step 5. L2 will appear on the TV
screen and the System’s display
panel.
• Unauthorized recording of
copyrighted television programs,
videotapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copyright
protection, it may not record
clearly.
Helpful Hints
E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 37