Maintenance and repair, General, Removing & replacing the belt clip – Midland Radio SP-300 User Manual
Page 16: Removing the belt clip, To replace the belt clip, Maxon, Maxon maxon, Maxon sp-300 hand held maintenance and repair
Page -13-
May 2001
MAXON
SP-300 HAND HELD
MAINTENANCE AND REPAIR
GENERAL
Any repair or adjustment should only be made by or under the
supervision of a qualified radio service technician.
When removing or fitting, use the Exploded View and Parts
List (Page 51) in conjunction with the following procedures:
REMOVING & REPLACING THE BELT
CLIP
Removing the belt clip:
1. Depress the metal release tab located on the top of
the belt clip with one hand.
2. With the other hand push the belt clip out of the belt
clip rail.
To replace the belt clip:
1. With the slides of the belt clip positioned in line with
the belt clip guide rails, slide the belt clip into posi-
tion until a click is heard.
ANT ANT
CH
VOL
4
3
2
1
maxon
1
2
ANT
ANT
CH
VOL
4
3
2
1
1
maxon maxon
Figure 1-Belt Clip Removal
Figure 2-Belt Clip Installation