Motorola MBP35BL - Manual (Page 11)

Using the Baby Monitor MBP35BL, MBP35BW 11
ENGLISH
3. Using the Baby Monitor MBP35BL,
MBP35BW
3.1 Setting up
• Place the camera in a convenient location and point the lens of the
camera towards the area you want to monitor.
• Tilt the head of the baby unit up or down to your desired position until
the parent unit gets a good reception of the baby.
NOTE
Do not place the camera within baby’s reach! If there is interference on
the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2 Night vision
The camera has 4 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor detects a low level of
ambient light, the LEDs will automatically activate and the screen on the
parent unit will display in black and white.
NOTE
If the ambient light near the Baby Unit is marginal, the screen may appear
to flicker between colour and black and white.
3.3 Talk function
Press and hold
t
on the Parent unit to talk to your baby through the
Baby unit loudspeaker. The symbol will be displayed in the middle
of the LCD screen.
3.4 Adjusting the volume of the Parent Unit
1. Press
<
and
>
to adjust the volume (5 levels) of the Parent Unit
during normal operations, and (5 volume levels) appears on
the display screen.