Morphy Richards Allergy cylinder vacuum cleaner - Manual (Page 5)

5
Power setting Application
Curtains
and delicate
fabrics
Textiles and
upholstery
Floor
coverings
such as
rugs or economy
setting for carpets
Carpets or
hard floor
coverings
Open Closed
Controlling suction power
The suction power can be varied to suit
the surface being cleaned, by using the
variable power control. See table for
guideline settings.
Certain models only
The suction power can also be adjusted
using the fingertip control on the handle.
Closed: full suction
Open:
low suction
Overheating protection
In the event of a motor overload, your
vacuum cleaner will switch off automatically.
If this occurs, press the on/off switch,
disconnect from the mains supply and leave
for 15 minutes to allow the motor cool down.
The vacuum cleaner cuts out
automatically when:
•
The floor nozzle or tubes become
blocked
• Using the vacuum cleaner with a full
dustbag
• The motor protection filter is very dirty
• The exhaust filter is very dirty.
Check and rectify before attempting to
reuse your vacuum cleaner.
IMPORTANT: Do not use your vacuum
cleaner without the filters fitted.
70047 Rev 1 4/3/05 11:46 AM Page 5