Morphy Richards Allergy cylinder vacuum cleaner - Manual (Page 4)

Standard
accessories Application
Curtains and
delicate
fabrics
Textiles and
upholstery
Shelves and
hard surfaces
Carpets and
other textile
floor coverings
(brushes up)
Settings for
heavy dirt and
smooth floors
(brushes down)
4
Tools and
accessories
Standard floor nozzle
This nozzle is suitable for general
purpose cleaning on a wide variety of floor
coverings.
Turbo brush (optional extra)
This nozzle is suitable for cleaning and
rejuvenating cut pile carpets and is ideal for
picking up stubborn dirt and pet hairs.
Hard floor brush (optional extra)
Designed specifically for use on wood,
tiles and all other hard floor types.
Tool storage
The upholstery nozzle and the crevice
tool are stored in the internal storage
compartment.
Operation
Suction hose
Snap the 360° rotating head on the
suction hose into the suction hose
opening on the vacuum cleaner.
The appropriate cleaning tool can be
attached directly to the other end of the
suction hose or the connecting tube can
be used between the suction hose and the
tool.
Switching on
Always pull out the supply cable to its
maximum length. Plug the appliance into
the mains supply. Ensure that the
electronic suction power control is set to
minimum by turning the dial anti-
clockwise as far as it will go. Push the
on/off foot switch to start the motor.
70047 Rev 1 4/3/05 11:46 AM Page 4