Maxtor SLD240 User Manual

Page 23

4.3.2 Slow Forward/Reverse

There are 4 speeds available for a slow playback: 1/2, 1/4, 1/8, 1/16. While playing back recorded video

at the recorded speed:

(1) Press the PAUSE button

for the slow playback mode.

(2) Forward: Turn the Shuttle dial

clockwise to view the recorded video in the forward direction

at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the right

increases the forward rate, as 1/2, 1/4, 1/8, and 1/16.

(3) Reverse: Turn the Shuttle dial

counterclockwise to view the recorded video in the reverse

direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the

left increases the reverse rate, as -1/2, -1/4, -1/8, and -1/16.

(4) Normal: Release the Shuttle dial

and then press the PLAY button

to return to the

normal speed of playback.

* You can also operate by using “<” button

and “>” button

4.3.3 Play Back Picture-by-Picture

While playing back recorded video at the recorded speed:

(1)

Press the PAUSE button

for the picture-by-picture mode.

(2)

There are two ways, by PAUSE button or by JOG, available to play in the picture-by-picture

mode, but the PAUSE button

can only function in a forward direction; the other, JOG dial

, can act in both a forward and a backward direction, as well as picture-by-picture.

By PAUSE button

Press the PAUSE button

to display one frame/field of a picture at a time in the

forward direction. (When playing back video recorded by a multiplexer, each

sequential press of the PAUSE button

will display each camera in sequence.)

By JOG dial

Turn the JOG dial

clockwise to display one frame/field of a picture at a time in the

forward direction. Turn the JOG dial counterclockwise to display one frame/field of a

picture at a time in the backward direction.

(3) Press the PLAY button

to return to the normal speed of playback.

4.3.4 Play Back Recorded Video from an HDD in the Mobile Rack

To play back a recorded video from HD 2, take the following steps:

(1) Press the Setup button

to enter the setup menu.

(2) Select DISK and press the Enter button

to enter the DISK SETTING page.

(3) Set the HD2 USAGE to REC and then exit the setup menu.

(4) Use the search function to access desired recorded video. For specific operation details please

refer to Section 4.4 (Search Operations ).