MITSUBISHI ELECTRIC DD-8050 - Manual (Page 35)

– 35 – EN
1L25
TROUBLESHOOTING GUIDE
If the DVD player does not perform properly when operated as instructed in this Owner’s Guide, check the
player, consulting the following checklist.
Notes
¡ Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Guide for details on correct operations.
¡ Playback from a desired track and random playback are not available during program playback.
¡ DOWN SAMPLING function is available only on the discs recorded in the Dolby Digital format.
¡ Some functions are prohibited on some discs.
Symptom Cause Remedy
No power ¡ Loose power plug. ¡ Insert the power plug firmly into the wall outlet.
The player does not
respond to the
remote control.
¡ The remote control is not aimed
at the sensor on the player.
¡ Obstacles present between the
remote control and the sensor.
¡ The remote control is too far
away from the player.
¡ Dead batteries.
¡ Aim the remote control directly at the sensor on
the player.
¡ Remove the obstacles from the signal path.
¡ Check room lighting.
¡ Use the remote control within 23 feet of the
player.
¡ Replace the batteries.
No picture
¡ Loose video connection.
¡ Wrong disc.
¡ Progressive scan is on.
(“P.SCAN” lights up in the display.)
¡ Connect the video cables firmly.
¡ Insert a correct video disc that plays on this player.
¡ If your TV is not compatible with progressive
scanning, set “PROGRESSIVE” to “INTERLACE” .
Disc cannot be
played
¡ No disc.
¡ Dirty disc.
¡ Disc is placed upside down.
¡ Parental lock is active.
¡ Insert a disc.
¡ Clean the disc.
¡ Place the disc correctly, with the label side up.
¡ Cancel the parental lock or change the control level.
No sound
¡ Loose audio connection.
¡ The power of the connected
audio component is off.
¡ Wrong audio output settings.
¡ Wrong input settings on the
connected audio component.
¡ Copy protection is active.
¡ Immediately after playing, press
fast forward or in reverse.
¡ The 1st layer is switching to the
2nd layer, when playing a two
layered disc.
¡ Connect the audio cables firmly.
¡ Turn the power of the audio component on.
¡ Correct the audio output settings.
¡ Correct the input settings on the audio
component.
Distorted picture
¡ Connect the player directly to the TV.
¡ There are some cases where pictures may be
slightly distorted, which are not a sign of a
malfunction.
¡ Although Pictures may stop for a moment, this
is not a malfunction and is quite common.
Audio or subtitle
language does not
match the setup. ¡ The selected language is not
available for audio or subtitles
on the DVD. ¡ No malfunction.
The camera angle
cannot be changed.
¡ The DVD does not contain
audio source or subtitles in the
selected language.
¡ No malfunction.
Audio or subtitle
language cannot be
changed.
¡ The DVD does not contain
sequences recorded from
different camera angles.
¡ No malfunction.
“Prohibited icon”
appears on the
screen, prohibiting
an operation. ¡ That operation is prohibited by
the player or disc. ¡ No malfunction.
A sound different
from the value set
in SETUP is output.
¡ Some discs in the DVD Audio output
sound different from the sound value
previously set in SETUP. ¡ No malfunction.
E5932UD_EN.qx3 04.6.7 3:43 PM Page 35