MITSUBISHI ELECTRIC DD-8050 - Manual (Page 20)

– 20 – EN
1L25
PROGRAM
(CD / Super Audio CD / DVD-A)
1 Press the MODE button in
stop mode.
¡ The program screen will appear.
2 Select a track using K or L buttons, then
press the ENTER button.
¡ If eight or more tracks have
been set in a program, the user
can switch the right part of the
screen with H or G.
3 Press the PLAY button.
¡ Playback will start in the programmed order.
¡ While the program is being played back, the STOP
button works as follows:
Press the STOP button once and then the PLAY button
again, and playback will restart from the point where
the STOP button was pressed (Program continued).
Press the STOP button twice and then the PLAY
button again, and playback will restart from the track
in the usual way (Program cleared).
Notes
¡ Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡ Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡ Up to 99 programs can be entered.
¡ To erase all tracks in the program at once, select
ALL CLEAR at the bottom of the list at Step 2.
¡ Playback from a desired track and random playback
are not available during program playback.
¡ Program settings are cleared when the power is
turned off or the disc loading tray is opened.
1 In STOP mode, press the
MODE button repeatedly
until the program screen
appears.
2 Select a group using o/p buttons, then
press the ENTER button.
¡ The track select screen will be
displayed.
¡ It takes approximately 5
seconds until a track selection
screen appears.
3 Select a track using o/p buttons and press
the ENTER button.
¡ To return to the group select screen from the track
select screen, press the RETURN button.
DVD-A
SUPER AUDIO CD CD
ENTER
PLAY
CLEAR
8 3:13 1 3:13
2 5:02 9 5:02
ALL CLEAR
9 5:02
1/1 2/2
CD[AUDIO] TOTAL 0:08:15
PROGRAM
ZOOM PLAYBACK
(enlargement on-screen)
Images can be enlarged on the screen to your taste.
1 Press the ZOOM button during playback.
¡ An image will be enlarged at the center of the screen.
¡ Pressing the ZOOM button cycles the zooming
images in three steps.
2 When the Arrow ( K / L / s / B ) buttons are pressed
during zoom play, the part to be zoomed moves.
¡ The zooming frame can be moved from the center 4
steps to the right, 4 steps to the left, 4 steps to the
top, and 4 steps to the bottom when 2 time zooming.
The frames will move 6 steps when 4 time zooming.
(In the 1.3-time zoom display, just one step can be
shifted up and down as well as right and left.)
¡ Current position will be displayed on the right bottom of the
screen. Press the ENTER button, and the display disappears.
Picture CD JPEG VCD DVD-RW DVD-V
Ч4 Ч2 Ч1.3
1/1 1/1
DVD-AUDIO TOTAL 00:00:00
PROGRAM
ENTER
PLAY
CLEAR
1 1:00:37
2 0:04:20
3 0:01:46
4 0:03:54
5 0:04:03
6 1:01:39
ALL CLEAR
1 1:00:37
4 Press the PLAY button.
Notes
¡ It may take time for all the respective track times to
be displayed.
¡ The programmed content is retained until the power
is turned off or the tray is opened.
¡ During program playback, TITLE, MENU, Arrow and
ENTER buttons on the remote controller are disabled.
¡ When the designated program playback ends, it
changes to stop mode.
1/1 2/3
1 Total 00:04:35
PROGRAM
ENTER
PLAY
CLEAR
1 02:02
2 01:22
3 04:35
4 03:49
5 03:05
6 04:16
7 02:55
2 01:22
1/1 1/3
CD[AUDIO] TOTAL 0:00:00
PROGRAM
ENTER
PLAY
CLEAR
2 5:02
1 3:13
3 1:22
4 4:35
5 3:49
6 3:05
7 4:18
1 3:13
1 Press the MODE button
in stop mode to display
the all group screen.
2 Press the PLAY button.
DVD-A
PLAYBACK OF ALL GROUPS
PLAY
All Group Playback
- - no indication - -
DVD-AUDIO TOTAL 2:16:19
ALL GROUP
VR-mode
E5932UD_EN.qx3 04.6.7 3:43 PM Page 20