Motorola MPC5200 - Manual (Page 12)

6 KADAK KwikNet MPC5200 FEC Device Driver
Creating the Driver Library
The KwikNet MPC5200 BestComm Library must be constructed from within the driver
installation directory KN5200E\MAKE . To create the library, proceed as follows. From the
Windows Start menu, choose the MS-DOS Command Prompt from the Programs folder.
Make the driver installation KN5200E\MAKE directory the current directory.
To use Microsoft's NMAKE utility, issue the following command.
NMAKE -fKN5200E.MAK "TOOLSET=XXX" "TRKPATH=treckpath"
The make symbol TOOLSET is defined to be XXX , the toolset mnemonic which identifies
the software tools which you are using.
The symbol TRKPATH is defined to be the string treckpath , the full path (or the path
relative to directory KN5200E\MAKE ) to your Turbo Treck TCP/IP installation directory.
For example, assume that the Turbo Treck TCP/IP release from Treck Inc. has been
installed in directory
C:\TRECK . Then, to build the driver library using Microsoft's NMAKE
utility and Metrowerks tools, issue the following command.
NMAKE -fKN5200E.MAK "TOOLSET=ME" "TRKPATH=C:\TRECK"
During the library construction process, all KwikNet device driver source files and
BestComm source files will be compiled and the resulting object modules will be placed
in directory
KN5200E\TOOLXXX\LIB . The KwikNet MPC5200 BestComm Library
KN5200E.A will be created from these object files and placed in directory
KN5200E\TOOLXXX\LIB . Note that the library file extension will be .A or .LIB or some
other extension as dictated by the toolset which you are using.
The KwikNet MPC5200 BestComm Library file KN5200E.A must be linked with your
application. Revise your KwikNet application link specification to include this library
after the KwikNet Library.
Note
The BestComm files listed in directory M5200BC may vary
as new versions of the BestComm software are released. If
you receive an updated version of the BestComm source
code directly from Freescale, you may have to edit the
library make specification file
KN5200E.MAK to revise the
list of BestComm source files being compiled and to
correct their dependencies.