Miller Electric BLUE STAR 145 DX - Manual (Page 29)

OM-4417 Page 25
8-3. Adjusting Engine Speed (Standard Models Only)
803 594-B
Tools Needed:
3750 ± 30 rpm (62 Hz)
After tuning engine, check engine
speed. See table for proper no load
speed. If necessary, adjust speed
as follows:
Start engine and run until warm.
1
Adjustment Screw
To increase speed, turn screw in
(clockwise). To decrease speed,
turn screw out (counterclockwise).
Y Stop engine. Close fuel
valve.
1