Lamp ballast – MITSUBISHI ELECTRIC WD-52525 User Manual
Page 11
MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Page 11
Accessing & Disconnecting The Lamp Ballast
Removing the Right Support
Remove the 3 screws shown below.
Removing the Lamp Ballast Shield
(4 screws)
Unplug CN1 & CN2
Connectors
NOTE: To remove the chassis, the two connectors to the Lamp Ballast must be
disconnected at the Lamp Ballast.
4 Screws
Unplug
Connectors
3 Screws