Moxa Technologies CP-114 Series - Manual (Page 9)

Introduction
Industio CP-114 User's Manual 1-3
Check List
Upon unpacking the Industio CP-114 Series, you should find items in the package:
"
Industio CP-114 Series 4 ports serial board×1
"
MOXA Software CD-ROM×1, which includes:
!
Drivers for MOXA Multiport Async Products
!
PComm Lite programming library and utilities for Windows NT/95/98
!
API-232 programming library and utility for DOS
!
User’s Manual (PDF)
"
Industio CP-114 Series User’s Manual (This manual)
"
Fan out cable DB37 to 4× DB9 (Male)
Installation Guide
This section gives a brief summary of how to install the Industio CP-114 Series under each
supported operating system. The installation is simple and involves the following stages:
Check the PCI BIOS settings
Install the Industio CP-114 Series board
See Chapter 2
and the connection cable
Install the software from the CD-ROM See respective O.S. Section
Configure the driver for the board and ports in Chapter 3
Connect the devices with the cable See Chapter 5 for cable wiring
Restart the system See Chapter 3 “Software
Check the driver initialization status Installation”
If the system restart successfully, you may
develop your applications or
See Chapter 4, “Serial
execute the desired applications Programming Tools”