Marantz PM-11S2 - Manual (Page 25)

19
NAMES AND FUNCTIONS
BASIC CONNECTIONS
BASIC OPERA
TIONS
ADV
ANCED CONNECTIONS
ADV
ANCED OPERA
TIONS
TROUBLESHOOTING
OTHERS
ADV
ANCED CONNECTIONS
ENGLISH
ADVANCED CONNECTIONS
BASIC CONNECTION FOR 5.1 MULTI-CHANNEL PLAYBACK
q The three units are connected using F.C.B.S. For the F.C.B.S connection, prepare 3 audio connection cables, and refer to
F.C.B.S. on page 20.
w Set the ID numbers for the three amplifiers as explained in HOW TO SET ID NUMBERS (page. 21).
When the ID 1 unit is operated, ID 2 and ID 3 units will operate in sync.
e Connect the outputs of players that have 5.1 channel analog outputs to each of the three units.
r If using an active subwoofer, see the instruction manual that came with the subwoofer for further instructions.
AC IN 3 1 2 3 1 2 AC IN 3 1 2 3 1 2
FRONT R FRONT L SURROUND R
MULTI CHANNEL AUDIO OUT
SURROUND L SUB-WOOFER CENTER
SACD multi-channel player, etc.
For center speaker or subwoofer
Set PM-11S2 to ID 2.
Set SPEAKER A button on front
panel in ON position.
Set PRE OUT button on front
panel in ON position.
Set to “STEREO”.
For surround speakers
Set PM-11S2 to ID 3.
Set SPEAKER A button on
front panel in ON position.
Set to “STEREO”.
To power outlet To power outlet
To line input jack
Active
subwoofer
Front center
speaker
L CH
surround
speaker
R CH
surround
speaker