Miele KM 344 - Manual (Page 8)

Setting the cooktop into place ^ Remove the protective backing, d,
from the seal,
c, supplied and stick it
under the edge of the cooktop.
^ Screw the gas regulator onto the nip-
ple at the rear of the cooktop. (See
"Gas Connection" for more guid-
ance).
^ Feed the power cord through the
cut-out to the power outlet.
^ Set the cooktop in the cut-out and
center it.
Install the appliance so that the
power cord or gas piping does not
come into contact with any portion of
the cooktop which may become hot
during use.
Installation
8
d
e