Miele KM 344 - Manual (Page 23)

After conversion
– After converting the cooktop unit to
LP gas, stick the label supplied with
the conversion kit next to the data
plate underneath the appliance.
– Check that the regulator has been
converted.
– Check that there are no leaks e.g.
with soapy water.
– Reassemble the appliance in reverse
order.
– Check that the burner is correctly as-
sembled.
– Turn on the gas supply.
– Light each of the burners in turn.
The flame should not go out when set
at "low" nor when the control knob is
quickly turned from "high" to "low".
When set at "high" the gas flame must
burn with the center clearly visible.
When installed properly, the flame will
be steady and quiet. It will also have a
sharp, blue inner core that will vary in
length proportional to the burner size.
Flame adjustment will not be necessary.
Converting to LP gas
23