Mazda 2008 6 - Manual (Page 121)

Black plate (121,1)
Before Getting In
l Be sure the windows, outside mirrors,
and outside lights are clean.
l Inspect inflation pressures and
condition of tires.
l Look under the vehicle for any sign of
fluid leaks.
l If you plan to back up, make sure
nothing is in your way.
NOTE
Engine oil, engine coolant, brake/clutch fluid,
washer fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.
After Getting In
l Are all doors closed and locked?
l Is the seat adjusted properly?
l Are the inside and outside mirrors
adjusted?
l Is everyone's seat belt fastened?
l Check all gauges.
l Check all warning lights when the
ignition switch is turned to the ON
position.
l Release the parking brake and make
sure the brake warning light goes off.
Always be thoroughly familiar with your
Mazda.
Before Driving Your Mazda
Before Starting the Engine
4-5
Mazda6_8X47-EA-07G_Edition1 Page121
Tuesday, May 29 2007 3:43 PM
Form No.8X47-EA-07G