Mitel 5324 IP - Manual (Page 25)

5312/5324 IP Phones User Guide
To turn Call Forward on and off (once it has been programmed):
1. Press (APPLICATIONS).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the Next softkey until the type of Call Forward appears. .
5. Do one of the following:
 On a 5312 IP Phone, press * (Change) and then press # (TurnOff/TurnOn)
 On a 5324 IP Phone, press the Review softkey. Press the Change softkey.
 To turn Call Forward on, press the TurnOn softkey, or, to turn Call Forward off, press
the TurnOff softkey.
Call Forward - Remote (I am Here)
To forward calls from a remote station to your current location:
1. Press (APPLICATIONS).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey.
4. Press # or the Next softkey until "I Am Here" appears.
5. Press * or the Yes softkey.
6. On a 5312 IP Phone only, if a number is already programmed, press * twice.
7. Dial the extension of the remote station.
If you make an error while dialing, use the # or the  softkey to backspace and correct
the number.
8. Press (DOWN) or the Save softkey.
To cancel Call Forward – Remote from the station that set the remote forwarding:
1. Lift the handset.
2. Dial appropriate feature access code.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward – Remote from the station that was forwarded:
1. Press (APPLICATIONS).
2. Press # or the No softkey until "Call Forwarding?" appears.
- 19 -