Motorola Jazz Pager - Manual (Page 37)

35
Note: The Travel Clock and Travel alarm display in 24-hour time only.
Note: You can temporarily disable the Travel alert (for example, on a
weekend). To disable the alert, follow these steps.
1. From the Standby screen, press and release
* until TRAVEL? displays.
Press + to enter the TRAVEL menu. Press *+ to enter TRAVEL
ALARM mode.
2. Press * until I I I I (the disable alert icon) displays.
3. Press ) to set and exit. The alarm remains set and enabled, but the
alert won’t occur until it is re-enabled.
➍ • When a Travel alarm expires, this screen
displays and the pager alerts.
• Press any button once to stop the alarm, and
again to clear the message.
Note: If the pager is off when an alarm
expires, it turns on, alerts and remains on.
➎
• If the Travel alarm is not stopped during
activation, the ALARM icon flashes.
• Press any button to read the alarm
message, and again to clear the message.
H H H HJ J J J
TRAVEL •
0000 0000::::3333 0000 H H H HJ J J J
11:30 P 9/28
OPTIONAL FEA
TURES