Monarch Instrument 9406 - Manual (Page 3)

Printing a Test Label
You can print a test label to get acquainted with using the
printer and make sure the printer is operating correctly. First,
refer to the
Equipment Manual for instructions on loading
supplies.
1. To turn the printer on, press the top of the power switch on
the back of the printer.
2. You will see copyright and software version messages, then
Calibrating...
as the printer calibrates the supply. Then you will see
PRINT MODE
Ready
3. Press Q . You will see
MAIN MENU
Print Mode >
4. Press
R
until you see
MAIN MENU
< Diagnostics
5. Press
E
. You will see
DIAGNOSTICS
Version >
Read This First
3