Meridian America Digital Audio Processor Meridian 518 - Manual (Page 20)

Operation summary 20
518 User Guide
Memory
In Resolution Enhancement mode, 518 maintains a continuous memory of
the DSP, Dither, Gain, In and Out settings for each source.
So, if you had determined that, e.g. CD should always use Gain 0dB but
that Radio could always use Emphasis and +2dB, then 518 will remember
these and automatically reconfigure itself for each source.
DSP
In addition to the DSP modes offered in Control Unit (see page 15),
Resolution Enhancement adds Bypass.
Bypass transmits all 24 bits on the input to the output without any
processing.
Note When Bypass is chosen, all the other front panel keys are disabled.
Operation summary
On the 518 front panel
Key Action
Source Selects Source or input
Display Cycle the display through:
Processing option with gain in dB
Dither option with gain in dB
Input/output choices with gain in dB
Sampling frequency and gain in dB
Blank
DSP Select main processing method: Bypass,
Gain, Emphasis, De-emphasis.
Dither Select dither or noise shaper to be used
In Set number of input bits
Out Set number of output bits and consumer or
professional use of channel status
s s Decrease volume/gain
n n Increase volume/gain
With the Remote Control
Source keys Selects input depending on
customisation.
Standby Puts the 518 into the Standby
state.
Clear Autoconfigure (in Standby)
w e w e Access the Menus
n s n s Change the Menus
Fn + Display Change 518 Display
Red
n n
and
s s Change the primary volume.
Mute Mutes output.