MIDLAND 74-250 Owner Manual - Manual (Page 14)

14
want. You will see on the display OFF.
2. Press and hold the “SET” button until the OFF flashes.
3. Press and release the “SNOOZE/FUNC” button to cause the
alarm time to be displayed. The hours will flash indicating
you can set as desired. Follow the instructions above to set the
alarm.
LISTENING TO WEATHER BROADCASTS
These icons indicate the receiving mode.
To change modes, press and hold the
SNOOZE/FUNC button until the desired
mode is displayed.
1. This icon indicates that weather alerts will only display and
not sound.
2. This icon indicates the weather receive is in voice mode.
3. This icon indicates normal alert monitoring mode.
 When no icons are displayed, the radio is off. Only time
and temperature are active. You can extend your battery
life if this mode is used when you do not require weather
alerts.
 With icon 2 and 3 displayed the broadcast is heard and
the radio is in alert mode. When an alert is received the
LED on the top of the radio flashes Red and the alert type
will scroll across the display.
 With icon 1 and 3 displayed the speaker is muted. When
an alert is received the siren or voice will not be heard. The
LED on top of the radio will flash Red and the alert type
will scroll across the display.
 With only icon 3 displayed the speaker is muted. When an
alert is received, the siren is heard then the speaker is un-
muted and the broadcast will be heard for 5 minutes, the
alert type will scroll across the display. If you do not desire