MIDLAND 74-250 Owner Manual - Manual (Page 13)

13
1. Press and hold the “SET” button until the hour is flashing.
Press the “UP or DOWN” buttons to set the hour.
2. Press and release the “SET” button, the minutes will flash.
Press and release the “UP or DOWN” buttons to change the
minutes.
3. Press and release the “SET” button when setting is
complete.
To set the second alarm press “MODE” button to cause the bell
icon with a 2 to be displayed and repeat the steps above.
Turning On or Off the Alarms
It is possible to turn on or off one or both of the alarms.
• From the clock display:
1. Press and release the “MODE” button (two or three times
depending on which alarm you want to turn off) to see the bell
icon on the display flashing with the number inside. The number
will be the alarm you are turning off.
2. Press and hold the “SET” button until the hours flash.
3. Press and release the “SNOOZE/FUNC” button. The display
will flash OFF.
4. Press “SET” to set the alarm to the off position.
5. To turn the alarm (s) back on follow the steps under Setting
the Alarms.
Turning on the Alarm (s)
• From the clock display:
1. Press and release the “MODE” button (two or three times
depending on which alarm you want to turn on) until you see
the bell icon on the display with the number of the alarm you