Tape operation / recording – Motorola FW-C155 User Manual
Page 22
22
English
Tape Operation / Recording
CD Synchronised start recording
1
Press
CD 1/2/3 to select the disc.
● You can programme the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2
Press ● on tape deck 1 to start recording.
➜ The disc will start playback automatically.
To stop recording
● Press
70 on tape deck 1, then press Ç to stop
disc playback.
Note:
– During CD synchronised start recording, do not
fast forward / rewind the tape in tape deck 2.
Dubbing tapes
1
Load the prerecorded tape in tape deck 2.
● Make sure both tapes have their full spool to the
left.
2
Press Å on tape deck 1 and followed by ●.
3
PressÉ on tape deck 2.
➜ Recording will start automatically.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press
70 on tape deck 1 and 2.
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.