Memorex MVDP1076 - Manual (Page 38)

37
CD OPERATION (CONTINUED)
While in the Stop mode, press the PROG.
button; the Program menu will appear on
the TV screen.
1
Select the first track to be played back using
the Number buttons to input two digits.
NOTE: If you incorrectly enter a track, press
the CLEAR button to clear it.
2
Select the next program number using the
Navigation (√,®,π,†) button and repeat
step 2 until all desired tracks have been
programmed (up to 16).
3
Use the Navigation (√,®,π,†) button 1 to select
"PLAY PROGRAM" at the bottom of the Program
menu; then press the ENTER button 2 to begin
Programmed playback. Playback will begin on the
first track that you programmed and the player will
continue to play all of the tracks that you
programmed in the order in which you programmed
them.
NOTE: To stop Programmed playback, press the
Stop (■) button.
1 2
4
PROGRAMMED PLAYBACK
The DVD player in this unit has a 16 track programmable memory that allows you to
program up to 16 tracks on any disc for playback in any desired order. You may program 16
different tracks or you may also program certain tracks to play more than once. To perform
Programmed Playback, proceed as follows:
TO CLEAR ALL OF THE PROGRAM:
While in the Stop mode, press the PROG button, then use the Navigation (√,®,π,†) button to select
"CLEAR ALL" at the bottom of the Program menu; then press the ENTER button to clear the program.
NOTE:
• If the disc is changed or the disc compartment door is opened, all the programs will be cleared.