Mark Levinson N40 - Manual (Page 19)

1-11
Nº40 Media Console Getting Started
Installation Considerations
The Nº40 Media Console requires special care during installation to
ensure optimal performance. Pay particular attention to instruc-
tions included in this section and to precautions included
throughout this owner’s manual.
Unpacking The Nº40 Media Console is a two-component system, each dedi-
cated to state of the art switching and processing of video and
audio, respectively. These two components are shipped in separate
boxes to avoid becoming unwieldy, but they must be used together.
They were designed as a single system.
Included with your new Nº40 are two pairs of knit, white gloves
designed to assist you in the initial unpacking and placement of
your new purchase. Please accept them as a token of our apprecia-
tion for having purchased our products.
When unpacking the Nº40:
DO save all packing materials for possible future shipping needs.
Only the original, purpose-designed shipping carton is acceptable
for return to the factory.
DO inspect the Nº40 for signs of damage during shipment. If
damage is discovered, contact an authorized Mark Levinson dealer
for assistance making appropriate claims.
DO locate and remove the accessory kits from the cartons. Make
sure it contains all of the items listed in the table below. If not,
contact an authorized Mark Levinson dealer.
In the Nº40 Video Processor carton:
Item Quantity
Nº40 Video Processor 1
Detachable AC power cord 1
BNC-to-RCA adapters 3
Gray RJ-11 Nº40 communications link cable 1
G ray RJ-45 PHASTLink™ communications
cable
1
Remote Control 1
AAA alkaline batteries 2
White gloves 1
Warranty & Product Registration Card 1