beautypg.com

Mercedes-Benz 2005 ML 350 User Manual

Page 279

background image

277

Practical hints

Replacing bulbs

Low beam halogen headlamp

̈

Press down the tab on top end of hous-
ing cover 1 and remove it in direction
of arrow.

̈

Pull electrical connector 2 off.

̈

Unclip the retainer spring on the bulb
socket and take out of the bulb.

̈

Insert the new bulb so that its socket
locates in the recess of the lamp hous-
ing.

̈

Clip on the retainer spring.

̈

Plug electrical connector 2 onto the
bulb.

̈

Align housing cover 1 and press until
it engages.

High beam halogen bulb (vehicles with
halogen bulbs: high beam and high
beam flasher; vehicles with Xenon*
headlamps: high beam flasher only),
parking and standing lamp

1 Housing cover for high beam halogen

bulb (vehicles with halogen bulbs: high
beam and high beam flasher; vehicles
with Xenon* headlamps: high beam
flasher only), parking and standing
lamp

2 Electrical connector for high beam

halogen bulb (vehicles with halogen
bulbs: high beam and high beam flash-
er; vehicles with Xenon* headlamps:
high beam flasher only)

3 Bulb socket for parking and standing

lamp bulb

This manual is related to the following products: