Mercedes-Benz 2005 ML 350 - Manual (Page 105)

103
Controls in detail
Seats
Folding down single seat
1 Head restraint
2 Hook
3 Tensioner
4 Hook and loop fastener strip
̈ Remove cargo floor plate
(
୴ page 165).
̈ Remove head restraint 1 from seat
cushion.
̈ Lift tensioner 3 upward to a horizon-
tal position to release tension of the
belt.
̈ Disengage hook 2 while holding onto
the seat firmly with one hand.
̈ Attach belt at hook and loop fastener
strip 4 (
୴ page 103) on underside of
seat.
5 Backrest release
6 Seat release
̈ Fold seat down until it locks securely in
place.
The red marking on the seat release 6
should not be visible.
̈ Store cargo floor plates inside the
backrest (
୴ page 165).
̈ Pull backrest release 5 and unfold
backrest until it locks securely in place.
̈ Install head restraint 1 in backrest
(
୴ page 103).
Storing single seat
̈ Remove head restraint from backrest
(
୴ page 103).
̈ Pull backrest release 5 and fold back-
rest forward until it locks securely in
place.
̈ Remove cargo floor plates from the
backrest.
̈ Pull seat release 6 ( ୴ page 103) and
fold seat up. ୴୴