Emptying, Using & cleaning turbo nozzle – Morphy Richards Bagless Vacuum Cleaner User Manual

Page 5

and tools.

• Never over extend the hose such that the

cleaner is pulled over.

IMPORTANT: Turning the cleaner sideways

helps prevent the cleaner being pulled along by
the stretch hose.

Using & cleaning turbo nozzle

(Certain models only)
Attach the turbo nozzle to the hose end

connector Í for use on upholstery and stairs.

After use your turbo nozzle may become

clogged. Turn over the nozzle and pull away
any hairs or fibres. If they are tightly wound
around the brush carefully snip the fibres with
scissors, being careful not to damage the brush
bar, pull away from the brush bar and dispose.

Emptying

Empty the dust canister regularly even if it

does not look full this will maintain the
performance.
1 Remove the front cover by lifting the cover

release lever ¤ E.

2 Lift-up the dust canister release Î and pull

the canister away from the main body.

3 Take the canister to the dustbin.
4 Turn the lid

turn anti-clockwise to unlock,

lift off the lid with pleated filter, Ì put to one
side. F

5 Lift out the central mesh filter Ô from the

dust canister Ó G. Brush clean if
necessary.

6 Empty out the dust canister Ó.
7 Re-fit the central mesh filter.
8 Shake the pleated filter to remove all dust.
9 Re-fit pleated filter with lid into the dust

canister by lining up the two arrows and
turning the lid

turn clockwise to lock.



‹

VC73360MUK-CyclonicBaglessRev3 3/11/05 4:41 pm Page 5