Motorola SD4504 - Manual (Page 14)

4
Setting Up
Registering Your Camera
You can register up to 8 devices (handsets, cameras, or
Cell Dock) to a base unit.
To register your new camera:
1 Press and hold the Registration button located
beneath the speaker on the camera.
2 Press and hold the PAGE button on base unit. The in
use/voice mail light on the base unit flashes. The
camera gives a confirmation beep once registered.
Note: If you exceed the registration limit of 8 devices, the
camera registration will fail.
To Check Registration:
• Press the CONNECT TO button
• Scroll through the items listed
to confirm that the device you
registered is available.